Storm and Water Damage Floor Restoration
After the water goes, the floor is still there. We bring it back.
- Prep & Repair
- Florida
- Free estimate
Hurricanes, flooding and plumbing failures leave slabs stained, mildewed and coated in residue. Often the concrete itself is fine and can be cleaned, repaired and polished, saving a full tear-out.
We assess the slab for soundness and moisture, clean and treat mildew, grind away stained surface and repair damage, then finish the floor as you prefer.
Safety and soundness first
We look for undermined slabs, cracks, contamination and trapped moisture. Contaminated floodwater can be hazardous, so follow guidance from your restoration and insurance professionals.
From damaged to new
After drying and testing, grinding removes stained and contaminated surface. Repairs and polishing follow. The result is often a floor in better shape than before.
Raw slab to polished floor.
From first call to finished floor.
The steps for storm & water damage floors, in the order they happen.
- 01
Assess and dry
Soundness and moisture are checked.
- 02
Clean and treat
Mildew and residue are addressed.
- 03
Grind and repair
Damaged surface is removed.
- 04
Polish
The floor is finished to your choice.
Is it right for your floor?
A good fit when
- Your slab was flooded or soaked
- You have mildew or discoloration on concrete
- You want to avoid replacing the floor
- You are rebuilding after a storm
Worth knowing
- Slabs must be dry and sound first
- Some contamination needs professional remediation
- Deep stains may remain visible
- Insurance requirements apply
Good questions about storm & water damage floors.
Can a flooded slab be saved?
Often yes, if it is sound and dried properly.
Do you handle insurance?
We provide scopes and photos that help. Claims are between you and your insurer.
What about mold?
Significant mold needs a licensed remediation professional first.
Related services.
P-06Prep & RepairMoisture Testing & MitigationFlorida slabs are damp.See the service 
P-01Prep & RepairDiamond GrindingThe step that decides the result: grinding the surface flat, clean and ready.See the service 
P-03Prep & RepairSpall & Pit RepairChips, pits and old patches turned into a sound, even surface.See the service 
P-01PolishingConcrete Floor PolishingDiamond-ground, densified and polished in steps until the slab you already have shines like glass.See the service Guides that help you decide
Hurricane and Flood Recovery for Concrete FloorsWhat to do first, what can be saved and how floors are restored.2 min read 
Concrete Moisture and Vapor in Florida SlabsWhy moisture testing matters here, how it is done and what the results mean.2 min read 
Removing Stains From Polished ConcreteHow to treat oil, coffee, wine, rust and other marks, and when to call for help.2 min read